Video: CT5-V Blackwing Wheel Offsets

[poor-sha]

I decided to pull the wheels again and measure the actual offsets as well as capture what was written on them. I hope this helps folks find aftermarket wheels that fit.

 

[Drozboyz]

Thank for that video… imoa a wheel manufacturer wont even consider making any custom rims until they have a car in their facility to scan on their own…

 

[Tall Steve]

You really are a bevy of great information!

 

[BlackwingMark]

I can't help but ask, is your straight edge sitting directly on the wheel? or the tire? Can't tell from the video.

 

[poor-sha]

Really good question. I'm 99% sure it was on the wheel but will take a look when I next have the wheels off.

 

[BlackwingMark]

Really good question. I'm 99% sure it was on the wheel but will take a look when I next have the wheels off.

Ya it's important as the tire sidewalls in many cases will extend beyond the wheel width.

 

[jkg]

Mirza mentioned a while back that the front backspacing is 20 (19x10) and the rear is a 19x11 with 50 backspacing. that matches the markings on the rim seen in this video.

 

[RupertH]

So, if I've done the math right- 4.21" from the mounting face to the outer rim up front, 3.53" in the back?

 

[jkg]

any chance anyone has measured the inner hub diameter of the wheel? would be nice to know this when trying to figure out aftermarket wheels

 

[MatthewAMEL]

Anyone able to dig up hub measurements yet?

Please be 67.1mm.