Oil filter brand

[shbox]

Throw a piece of folded sandpaper in your band wrench to minimize slippage. I would bet the filters are put on by a machine or at least some mechanical assistance device. I've always noticed even the filters I put on seem to be tighter when removing than when installed.

 

[Dirkbg]

Or try a wide rubber band or the opening of a latex glove. Something to give the metal band grip on the metal.

 

[CB34]

Use this - https://www.amazon.com/dp/B093XD72M7?th=1

Can always extend the ratchet for extra torque but I was fine using a standard 3/8" drive SK ratchet.

 

[ngoni]

Use this - https://www.amazon.com/dp/B093XD72M7?th=1

Can always extend the ratchet for extra torque but I was fine using a standard 3/8" drive SK ratchet.

I have that it absolutely does not work when the filter is stuck. It just rounds off the edges and you need something like the channel locks to manhandle it off.

 

[jbawden]

If the filter socket on the right doesn't get it done, the filter pliers on the left are undefeated in my shop.

 

[Melon]

The only car I had constant issues with an oil filter was my 2006 Corolla. IDK what happened, hand tight + 1/4 turn = RED LOCTITE.
The pliers are my go-to, don't be afraid to crush the filter a little, you're not going to reuse it.