CT4-V Brake Question

[sammushinsky]

Hey ya’ll,

I hope this is in the right thread/spot. Sitting at about 18k miles (CT4BW) and just had a new wheel and new front tires put on (bent wheel on pothole) and was recommended to replace front brakes by my Tire Shop. Dealer told me that generally rotors have to be replaced with brakes but also told me if the rotors are within spec, that I can just drop in a new set of pads and keep going until the next brake change. With this in mind, if my rotors are within spec (going to get it looked at this week), I was wondering what brake pads to get? OEM ones seem quite expensive and hard to come by. I don’t want to compromise stopping power so I understand if I must go with OEM but was wondering what other options are / where to get them?

 

[Champale]

I would be very surprised if your 4BW needed new rotors at this point unless you have been doing trackdays or lots of extremely hard braking from huge speeds (well north of 100mph). And the tire shop said your pads were worn down? A lot of newer sporty cars with the electronic braking/stability/track modes will actually drag the rear brakes more than you might realize and this can kill rear pads but unless you've been using the car in high performance driving I would be a little surprised if the pads were done.

As for pads, there are a million great options and various price points. I personally would stay away from the absolute cheapest stuff and especially 'ceramic' pads which tout no dust (and, hence, no real stopping power!). I like Ferodo 2500s but Hawk, EBC, Carbotech, G Loc, etc make OE comparable or even better pads.

 

[sammushinsky]

Yeah, they told me the front brake pads are being worn down. I am going to get them looked at another tire shop though to get a second opinion. No track days and honestly none necessarily planned, but I do go on canyon runs with friends and have many moments hitting above triple digits on the freeways local to me so I would like something that I can rely on when the “oh crap” sensor goes off haha. Overall, not a lot of insanely fast/crazy driving.

Not looking to reduce brake dust, albeit annoying, I prioritize stopping power/ability first. I was planning to go w/ GiroDisc Rotors after these rotors are toast because i’ve heard tons of great reviews for the quality and price, but just trying to see what other pad options are comparable to OEM that aren’t $400-$450

I’ll make sure to check all of those out!

 

[Champale]

Like everything else, brake pads have gone up in price dramatically over the last few years. I would ask Ken at KNS Brakes what he would recommend for your use case.

 

[sammushinsky]

Spoke with KNS about the Ferodo DS2500. We'll see what happens. If I go with those, how does the brake wear sensor work? Or does that only work with the OEM pads? Not really familiar with brakes in any way shape or form :/

 

[Champale]

The sensor clips in on the new pads just like the factory ones if I recall.