I bought mine through Vladi at Street driven performance. The CF Hood came from EOS. Fitment is not 100 percent perfect of course like you said for such a large piece of CF. I had to adjust the front latch a lot because the original positioning of it doesn't close the hood flush at all. I also had to put spacers/washers on the 4 bolts that attach the hood to the hinges to raise the back slightly which in turn lowered the front to sit a little more flush. I also removed the cover plate for the vent as it was rubbing against the engine cover. After all those adjustments, which takes patience, I've got my hood to sit as flush as I could without it rubbing the engine cover. It is not a perfect OEM fitment. The side gaps are noticeably larger, but not too bad for me. I can post pictures later on here but if you search for CF hood on the Facebook forums (Blackwing Owners, CT4-V Blackwing Owners, etc) I'm the one who posted about a CF hood. Vladi refunded me 200 bucks since I wasn't too pleased with the fitment which was cool. I also took the OEM (weather?) seal from the OEM hood and attached it with 3M tape to the CF hood to close the gap more in the front. All in all, I would say it's a 90-95% good fit after adjustments. Biggest thing are the side gaps.
