Welcome to the Cadillac V-Series Forums!

Recent content by MeGoFast

  1. MeGoFast

    Blackwing Collector Series CoA

    I mean, I could probably put part numbers and measurements out there for people that wanted to maybe do something with it. The framing was about 500 bucks and I think I have 30 in the steering wheel plaque, 30 in the emblem, 10 in the carbon fiber sheet and 20 in the laser engraving. Call it...
  2. MeGoFast

    Subwoofer Install

    Here's my install: 5V Blackwing Trunk/Sub Install Simple method to install in the tirewell and keep the whole trunk for use.
  3. MeGoFast

    Blackwing Collector Series CoA

    ***DISCLAIMER*** So first, let me say that I DO have a CT5-V Blackwing that is part of the Collectors Edition, and in no way am I saying that the work I've done is authentic from Cadillac, it's my attempt to recreate something that came with the car originally and if I sell the vehicle, I'll...
  4. MeGoFast

    Signature Wheel's Cadillac Blackwing Adventures

    Finally! They're so much better in person. It looks stunning on the car. Fitment is perfect, couldn't be happier!
  5. MeGoFast

    5V Blackwing Trunk/Sub Install

    Did you try this one yet? Curious if you had the same result.
  6. MeGoFast

    5V Blackwing Trunk/Sub Install

    Worked great for me, super easy, quick fix on this end. It's easy to undo if you decide you want to and it's free.
  7. MeGoFast

    Signature Wheel's Cadillac Blackwing Adventures

    Getting my tires mounted this afternoon, car gets lowered tomorrow, so I'll be putting them on the car and uploading pics tomorrow. Terrance is the man! These wheels are gorgeous. I went with the polished lip on the stainless SV310S with stainless hardware and the blackwing centercaps add-ons...
  8. MeGoFast

    How much of that noise is fake?

    I cant remember where else I mentioned this but at the bottom of my stereo install post, I solve this problem for free in 30 mins. https://www.cadillacvnet.com/forums/threads/5v-blackwing-trunk-sub-install.5985/#post-118280
  9. MeGoFast

    3rd V, first Blackwing

    Good luck in the search! Hope you find the perfect one.
  10. MeGoFast

    3rd V, first Blackwing

    Regular use of autotempest.com It searches all the online sites. Im sure there are still some it misses that aren't advertised outside of the individual dealers but it found mine at a Lexus dealer in NYC.
  11. MeGoFast

    How much of that noise is fake?

    Added a 12" sub to my 5V tire well and it was immediately obvious the sound was being piped in. Look at my last 2 threads on how to disable. I didnt notice before aftermarket stereo but im a naturalist and once I knew it was electronic sound I felt like I may as well buy the new Charger EV...
  12. MeGoFast

    5V Blackwing Trunk/Sub Install

    Adding this to this post too: ANC issue solved. I dont like cutting factory harnesses. I also read that on Older Vs if the ANC system sees a fault, it disables completely. There are 3 microphones in cabin. 2 of them are driver and passenger side just over your head, hidden under the grab handle...
  13. MeGoFast

    CT5-V Getting Rid of Fake Engine Noise

    ANC issue solved. I dont like cutting factory harnesses. I also read that on Older Vs if the ANC system sees a fault, it disables completely. There are 3 microphones in cabin. 2 of them are driver and passenger side just over your head, hidden under the grab handle at the top of the door...
  14. MeGoFast

    CT5-V Getting Rid of Fake Engine Noise

    I'm going to pull the headliner just a tad, the mics are up there but you can get to them without a full removal. I'll unplug them there. Sorry you're stuck with that signal input. You've already been at the amp side to remove the ANC stuff. All of the inputs and outputs for your speakers...
  15. MeGoFast

    5V Blackwing Trunk/Sub Install

    This is where the black paint comes in handy for sure. Then I lay it down by the fire (Southpark Chef) and cut the carpet, leaving about a 1" portion on each side. Worked out braces for the back portion of the cover panel because I want it to be somewhat still load bearing, have weight to...
Back
Top Bottom