Search results

I am happy with my Luxus mats. The fit and look is great. Easy to clean as well.

Definitely need to get me some smoked side markers!!

sounds good!!

Ls3 swap that vette!!!

Here is my 05 Sierra. Boosted 6.3 with all the goodies

Are these bead locks?

Funny, but my first thought when i bought the CT4 was swapping a LT4 in there🤷🏼‍♂️

I agree. I like a stock look with an exhaust upgrade.

Im curious is anyone running the Tapout Stage 1 camshafts? If so how do you like the kit as well as the idle note? Is anyone running any other cam kit? Im looking to do a few mods and I want to add a cam kit while I am there. I love how the Tapout stage 2 cams sound but they told me they don't...

My idle pressure is anywhere between 19-23. Under load it gets 60-70 range. I come from the truck world and I saw 40 psi at idle so this was concerning to me but I’m starting to see that it’s normal, as long as the pressure progressively increases under load.

Definitely need to be careful parking and exiting parking lots at an angle or with a dip in the road🤦🏻‍♂️

Thank you. I figured as much but wanted to to be reassured.

I have been running the jB4 on my CT4 blackwing for about 8 months now. I recently was looking at the gauges while I was at a stoplight and noticed it shows .7 boost at idle while the gauge cluster shows 11 inch of Vacuum. I do have the Tapout oversized air intake and green filters as well as a...

You could always Start off on the cheaper side and pulley down. Spin that blower a little harder you could probably get your 60 hp for $300 or so. Griptec has a few options for pulleys.

Forza performance makes a kit

Yes, I know. I have had the p1400 code for 10 months. It stopped after the throttle body install. Something must have gotten disconnected or left loose.

I have checked twice. I prob need to check again

On January 4th I installed the Gigs ported throttle body and the motorad ignition coils on my CT4 Blackwing. I am also using the JB4 and the Tapout oversized air intake. For anyone running the Tapout oversized intake lid you know it has a tendency to throw a p1400 code. Mine usually throws the...

Mine is from tapout. Fits great. No leaks

Thanks