Search results

My idle pressure is anywhere between 19-23. Under load it gets 60-70 range. I come from the truck world and I saw 40 psi at idle so this was concerning to me but I’m starting to see that it’s normal, as long as the pressure progressively increases under load.

Definitely need to be careful parking and exiting parking lots at an angle or with a dip in the road🤦🏻‍♂️

Thank you. I figured as much but wanted to to be reassured.

I have been running the jB4 on my CT4 blackwing for about 8 months now. I recently was looking at the gauges while I was at a stoplight and noticed it shows .7 boost at idle while the gauge cluster shows 11 inch of Vacuum. I do have the Tapout oversized air intake and green filters as well as a...

You could always Start off on the cheaper side and pulley down. Spin that blower a little harder you could probably get your 60 hp for $300 or so. Griptec has a few options for pulleys.

Forza performance makes a kit

Yes, I know. I have had the p1400 code for 10 months. It stopped after the throttle body install. Something must have gotten disconnected or left loose.

I have checked twice. I prob need to check again

On January 4th I installed the Gigs ported throttle body and the motorad ignition coils on my CT4 Blackwing. I am also using the JB4 and the Tapout oversized air intake. For anyone running the Tapout oversized intake lid you know it has a tendency to throw a p1400 code. Mine usually throws the...

Mine is from tapout. Fits great. No leaks

Thanks

If you were a guitar player you knew who Vai was. Even at that time. He was well known in the underground replacing Malmsteen in Alcatrazz which was huge shoes to fill.

Little Stevie Vai.... You must be speaking of the Fexable release. I still got my copy on vinyl.

On my setup there will be no cats.

That sounds great!!! I will adding the catless down pipe as well so it should get a little rowdy in the hood🤣

thanks for your reply. I’m actually basing this swap after your car. Is that a black widow muffler?

For anyone that has done a muffler swap. I was thinking of cutting out the stock muffler and adding a Y at each outlet. Out of the Y, straight pipe to the valved outlet and a muffler to the second outlet. My question is if you are leaving the valve in its stock location will it still operate...

Just put a 2650 on there and call it a day

There are some videos on YouTube not specific to the ct4 but for the ATS. Might be worth the view. Maybe not apples to apples but close.

Damn you!! I just bought downpipes and coils. 😭