Search results

Yes. See you there.

Anyone going next week?

Sorry for the ignorance. Does the traction control system just pull spark? My previous cars, it has pulled fuel. I've had this happen to me twice. Both times under hard acceleration. The first time, I thought I hit the rev limiter but I was around 6000 RPMs. Second time it happened, I was...

Did you make to 57k on the original pads (and rotor)?

Just to chime in on the LLJ harness. I ordered one and am having trouble with it. The tweeters in the front A-pillars don't seem to work with it plugged in. They claim it's the right model harness, but have been looking into it (waiting on response). Not sure if the 4BW and 5BW have different amps.

Did you get a chance to try it? I've been trying to get a hold of LLJ (no response to my last two emails). The last response was over a week ago. They said they would get with their techs.

Are there 4 total wires? If so, it's exactly the same. For the lining, you need to remove 4 plastic push pins. You can then bend the carpet enough to get to amp and bolts. There are 3 10mm bolts that hold the amp down.

Can it fit in the traditional spare location (under the trunk mat)? On the 4BW, there's a large styrofoam spacer with the pump and few other accessories. It comes up easily and might fit the tire.

I have been emailing them. They said it should be the correct harness. I sent over pictures of everything. Waiting on response now.

I ordered this one from LLJ and installed it over the weekend. It doesn't completely work. I noticed that sound inside the car was really muffled. With this bypass, my A-pillar tweeters are disconnected. Anyone had similar issues?

It estimates the fuel savings in ml :). I think it added up to a couple of gallons a year for our SUV. Not worth the call and headache from the wife for me.

My wife's SUV tends to drain the battery with the Auto on/off. I told her to push the button to cancel it every time she starts it. She doesn't remember (or care) and ended up with a dead battery multiple times. The battery itself tested fine. I ended up pulling a sensor that connects to the...

I put the ZL1 lift pads on the back right next to the brace. I used my Quickjack 7000TLX with this configuration over the weekend.

I put the the rear Zl1 Jack pad right next to the suspension cradle. I used it with Quickjack 7000TLX to change the rear differential flui.

Testing out the Quickjack 7000TLX and draining the rear differential fluid.

Did she use a Cricut? If so, can you share the file? I'll get my wife to make one.

It seems like there is no point in using PTM Wet. You could just use non-PTM modes.

I used the link below to get the Camera jack pads installed. I jacked it up on to 2 - 2"x 10" and then installed the jack pads. Now it's a lot easier. I haven't messed with the rear jack points yet...

How did you bolt it to the car?

Looks awesome! Do you have any pics of the build process?