Search results

It'll probably self adjust to the point the car will just ignore it. There are folks who swear they had similar thing happen on UNCATTED headers. They cleared the code once or twice the first 500 miles and just never came back.

Im more curious if it actually made the blower noticeably louder. Pretty sure thats what everybody wants to know.

If you look at the rounded edges of the box, those are soft rubber pieces that helps seal when the hood is closed.

Yeah, $9K sounds considering they didnt really have to re-engineer alot of things. Bushings and tires are already parts bin stuff. Stiffer spring rates, adjusted MR valving for the stiffer springs, larger sways, adjusted E-Diff and steering feedback. Revised knuckles to get more camber means...

The question is, 2025 Blackwing ordering turning into the same 2022 Goat Rodeo process?

Installed those ZL1 addon style lift points on the car. Dont have to worry about using those slotted hockey pucks to jack the car up. FYSA: I didnt trust just having the 2 screws to hold them in place. I added my trusty 3M panel bond double sided tape for that extra "that thing better not...

From owning both at one time, part of me felt like the 4BW seats are narrower than my 5BW seats.

The hinge holes on the the stock mount are slotted so it’s fairly easy to adjust the hood. Didn’t even had to adjust the striker/latch.

The stock hinge holes are slotted so you for some adjustments there. Makes adjusting it a breeze. Didn’t even had to adjust the striker like on some other cars I’ve had. These are night and day easier to install than my old carbon creation hood on my old C6Z. The bolt holes and embedded...

Anderson Composites, painted the sides to blend in some.

Nooooo idea what the hell happened. Literally copied a picture and pasted it. It showed up in my phone fine. :ROFLMAO:

I’m using aeroforce gauges. But somebody told me that banks gauges works with global b too.

I can see IAT, IAT2 and MAT2 numbers on my 5BW. Normally, IAT2 and MAT2 will be close. But once the engine is hot, the blower and intercooler bricks starts getting heat soaked, specially when in traffic. Id see my IAT2 at around 130 but my MAT2 would be 150. It cools down to 130 ish once i...

Yup, running slight underpulley 2.3, Kong X-port, Katech 103TB, DSX Lid and already running a MM Wild can on the bottom right. Just recently got it fully tuned and working on getting an intake and flex fuel installed next. Yes sir, powder coated Cherry Illusion iirc with the stock Blackwing...

We looked over the instructions and nothing really said what setting the stock exhaust valves need to be before pulling them off. Both were set OPEN on MyMode when pulled. Trying to put the actuators back into the stock mufflers, gonna set it to Touring (closed), pull and transfer them to the...

Which scan tool is that? Might be worth a shot considering he doesnt have a dealer appointment till the 3rd.

Looks like Cordes, just wrapped in heat film.

Im saying why would he want something that wide for A/S tires. Still wont get traction on A/S compared to actual ultra summer tires or competition tires.

Two guys I personally know. First one installed an axle back and had to get a relearn after getting a P3172 "Variable Exh Flow Control Valve - Position Signal Exceed Lower Limit". Another just installed the full catback and got the code yesterday. Both pulled the controllers with the valves...

Cleaned it up some by rerouting lines and harness.