Search results

Same thing happens to me. I found if I hold the pump at an angle (20 - 30° to the side), it works fine. If the pump handle is straight up and down, it keeps shutting off.

That is probably it - drove about 10 miles today and no CEL. Hope it stays that way!

My CT4 BW popped 2 codes today. Any ideas what these could be?? I was getting my car ready today to be put away for the winter so I added 8oz of Stabil to half a tank of gas. I then drove to the gas station to top off the tank (2 miles away) and popped the CEL on the way. I filled the...

Man, that was the worst oil change I've ever experienced and turned from something fun to super stressful. The oil filter was on there damn tight! Took a 30 minute job into 2 hours of frustration. Tried an oil filter wrench first (kind with the rubber strap that goes around the filter). All...

1100, bought end of June

I 100% agree with these. I didn't even think of the last one, but that would be awesome if we could do that. With the V button, don't know if anyone else is like me, but 99.5% of my driving is in V mode. I start the car up, hit the V button, and off I go. I wish there was a way to just leave...

I saw there is an installation guide on the Tapout website which looks pretty easy. This is definitely high up on my list for early next year. When ordering this, is it coming with a preloaded tune from Tapout for the LF4? Or a generic tune from JB4? So if I'm looking for 50-60 hp instead of...

This is intriguing. I'd be happy with 50-60 hp and not worrying about new plugs. How is the install of the JB4? Pretty straight forward? For warranty work, can you just unplug and go back to stock and no one would know for the better? That's the only thing I would be hesitant about. I've...

I installed them yesterday too. I don't know why Cadillac needed 13 screws to open the air box :hb. Way overkill! 2 were a bit of a pain in the back corners as they were directly under the air tubes. The green filters looked good though and fit nicely (y)

The good, the bad, the ugly. The good: I got the 4BW CF wing installed last night and it looks great! The bad: the stock spoiler was a bitch to get off. Double sided tape runs the length of the spoiler (inside edge towards the front of the car) so that was fun lol. The most challenging...

@Akamai58 Question for you as it seems you've done this already. Does the double sided tape run the length of the non-CF spoiler or just the outter edges on the driver and passenger side? I'm trying to mentally prepare myself for how much elbow grease it will take. My CF spoiler arrived...

Never noticed it either, but I have the same so it's probably normal.;shrug

I went without it. I have a sun roof in my Yukon and have used it maybe 20 times in the last 12 years... it's just not worth it to me.

Second question - for the carbon front splitter on the CT4 BW, has it been confirmed it can't bolt directly up to the non-carbon front bumper? I could have sworn I saw here or on Facebook that someone did in fact directly bolt it on a non-carbon bumper; however, I also see a post here that it...

What is the correct part number for the CT4 BW carbon fiber spoiler?? I've seen two part numbers listed on the forum: 85561509 and 85517781 Both come back as carbon spoilers for the CT4 when I search them on GM parts sites. The second one looks correct from the picture, but I've seen...

Looks good! I'll be the combo breaker next time with a shadow CT4 BW lol

No, not that I recall about spring mountain. I did get a welcome email after I got the car.

I can't go this weekend, kids have soccer games/team pictures all Saturday morning. I'll have to catch the next one!

Still no email for me about the badges. They must be releasing in order of production I guess.