Search results

Thanks, nice to see a recommendation for a product that doesn't cost an arm and a leg. What product are you calling a "rinse less wash" ? Edited to add that the car has PPF only half way up the hood, no professional ceramic though I do use "ceramic" spray waxes. Don

I have a home rainwater collection system along with sediment and charcoal filters and UV. So, having said that anyone have suggestions for a car only pressure washer? Thanks, Don

GM needs to buy it back from you. Good luck, Don

Nah, wish I had a pressure washer. Mine is a simple device hooked up to the hose bib but it does coat the car with a nice layer of foam. Don

An intelligent alternative. I do have a foam cannon. Don

I have a 2023 4BW Road Atlanta IMSA car. I take very good care of my cars. I use the two bucket wash procedure. My question is, if the car were to become really, really filthy and a pressure washer might be necessary, would it strip off the graphics on the hood? Thanks, Don

I wonder if there is a MAC vs Microsoft issue here? When I click on it, it "flies" off to the upper right corner of the screen and vanishes. Thoughts? Thanks, Don

Looks great to me, hope it stays that way for you. Don

Thanks for the reference. Just finished looking at and it was an excellent video. Don

Thanks for the link, excellent. The only change I'd make would be to slow it down a bit to capture more of the info. Don

I have a 2023 BW4 with the automatic. There is a round, chrome like connector that sits about in line with the red and blue part of the logo on the engine cover. This component rotates clockwise from about 0-90 degrees. There is a snap on rubber cap that has one "pin" in the center. Anyone...

The car is always garaged. I usually let it idle for about 12sec (an arbitrary # of course) and it's about 1.5mi to the exit from our neighborhood then onto a 60MPH two lane. I'm very gentle with cars and I certainly don't use high RPMs when it's cold. Don

I have the Atlanta Raceway IMSA special edition 4BW. There is a TX DOT drainage dip between our neighborhood and the busy two lane road. It was next to impossible to cross the dip w/o damaging the front of the splitter. And damaged it got. Finally gave up and cut the damaged section off about...

I won't say the 4BW has a very roomy back seat but it's OK, particularly since we rarely have a back seat occupant. I'm 6' 2" and if I put the driver's seat where I like it (I don't like the so called Italian straight arm driving position), I have adequate room, knees in a normal position. Don

I know you build really fast cars. Sounds like a real world 1/4 mile time for a bone stock CTV-4 would be around 12.4? Don

Boerne, about 15mi NW of San Antonio. Don

If the rev limiter goes to 6500 how will 4500 trash the engine? If that were the case, there'd be endless engine replacements. Don

I'm pretty obsessive about car maintenance. On the way out of our neighborhood, left the mail boxes and to my irritation, the shifter went to manual not drive and quickly but briefly ramped up to 4500rpm on very light load (sharp downhill) conditions before I corrected it. Thanks for the...

Does anyone know at what RPM the computer cuts off fuel flow to the engine in the 4BW? Thanks, Don

I have a Road Atlants edition 4BW. I'm very happy with the car, zeo mechanical issues. I do have a significant issue with plastic sounding squeaks in the interior. I've been all over the interior focusing on lose fasteners in the seat itself, nothing I can find that is lose. The noise does...