Search results

Congratulations, welcome and good luck with it.

Hopefully sounds worse than it is. Please keep us posted and good luck

Elite Engineering E2-X PCV Oil... https://www.amazon.com/dp/B06Y2Z69SS?ref=ppx_pop_mob_ap_share This is the kit I just received. It's seems the quick connect fitting isn't necessary anymore. They supply a t-fitting to just splice into the line. Opon install I will determine which version I will...

I have always preferred 2 post as I perform all my own. Most brands usually have a wide and or an asymmetrical to allow room to open door.

I concur to the year lifespan. My car is garaged has been caught in the rain a few times, not driven in cold weather and will 2 years be in my possession as of June.

I Went to the club site. For $150 1 year membership you get a meal from what I can gather. If you consider that nominal. Or a major perk. I'm not cheap but I don't see value there. It is an open event and someone from the club could sell me. I prefer blondes.

Planning on making the event. Not a member of V-club. What are benefits of me joining just for a C&C event? I'm central NJ it's probably a 2 hour ride each way for me.

https://a.co/d/aAUYJwy Amazon now carries the line. Pretty easy to apply but that bottle is just enough to do rims only. It will probably take longer to thoroughly clean the rims. I pulled wheels to clean and apply as it's really the only way to coat backside and rim barrels.

D Drive around the block leaves brake dust.🥺 I bought a ceramic kit off Autogeek.com and did my wheels made a tremendous difference. Think it's time for a recoat. Brake dust would come off with no agitation using a 1200psi electric power washer. Water softer filter should make a difference...

Trim tool sets are cheap investment and you will be amazed at how handy they are.

I have a 32gb SD card formatted for fat 32 and SVR still doesn't recognize it. Kind of given up on it. Did read guys were having issues with the module on other models and resolved with dealer replacement.😔

@Rob appreciate all your time and effort setting up and maintaining this sight

Same results can be had with a heat gun if you don't overdo it. I haven't done it but have seen video of shop using steel wool on film and using heat gun to reflow film. Pretty impressive. I'm a firm believer in it. Last DD prior to using film looked like front bumper was sandblasted and...

Beauty of PPF is any etching from bird dropping disappear after cleaning and a dose of warm sunlight

If you don't have them invest in good set of plastic or delrin trim tool set. Won't inflict damage to painted parts as opposed to using a screwdriver

I'll throw in here. Dealer installed I believe SunTek PPF on hood, front fenders, bumper cover. I added A pillars and roof up to sunroof opening. Once car was delivered to me I went to local installer and had him add headlights, door sills, black B pillars, and door pockets. Dealer package to...

So if/when a quality diecast becomes available for either Blackwing,......

My guess is Garfield is the orange tabby and Nermal is the blue camera hog 😎👍

Glad to hear he recovered from his procedures. We now have pet insurance on our herd. Hope I last as long as him on my new hardware 🤣

Mobil 1 Dexos gen 2 0w40 now goes by the Mobil 1 Supercar label