CT4 Door Panel Installation Help

[piranha971]

I needed to replace an interior door panel on my CT4BW and for the life of me, I can't figure out how to put the rear door panel back in. The top weather strip is in the way and wouldn't seat properly no matter what I do. There has got to be a trick to this. Any tips would be MUCH appreciated!!! Thanks

 

[piranha971]

I got it. I put the clips and the weather seal on first, aligned them with trim grooves, put the trim on and pushed in. This is opposite of the service manual instructions, which I would not get to work.

 

[Rowsdower90]

Was this for a front or rear door? My rear door was dented by someone at a car show today, and I was trying to take the rear door panel off.

 

[piranha971]

Same method for front and rear.

 

[BW56M]

@Rowsdower90, take it to a "paintless dent removal" professional. Unless you know what you're doing, you will cause more harm than good.

 

[Rowsdower90]

@Rowsdower90, take it to a "paintless dent removal" professional. Unless you know what you're doing, you will cause more harm than good.

When you're as crazy as me, you take your panel off for the PDR guy so that they don't scratch or damage it! Haha. It's already fixed, thanks for the help everyone. I found a youtube video of the front door removal, and like piranha971 said, same method for front and rear.

​