Recent content by Hdixon46-559

Hate to hear that about yours! But no, didn’t have any issues like this. Have you tried putting any pressure again the pillar when you’re accelerating? See if you could have a passenger try this while driving. Sounds like there’s a small gap making this vibration. Fix could be unsnap the pillar...

If you show them the pictures I posted above, they should be good to go. The valves are located at the tips, so as long as they cut anywhere before that, all should go as planned.

You still interested in the stock box? It's just collecting dust & taking up space in the garage. Let me know!

Yep. Exactly what I was thinking. Appreciate the confirmation!

Pretty sure this is a no go but wanted to confirm. No way a 17” would clear in the rear on a 4 BW correct? Could be swore I read somewhere 18” was the smallest due to the enlarged caliper.

👊🏻👊🏻👊🏻

No idea of the new weight distribution. No effect on the handling after the removal. And the wheels spin quite a bit with the JB4 installed. This were purely to help get a truer tone of the motor as I felt the stock box was too quite. Even with the values fully open.

You still have a set of these? The original set I ordered ended up not working.

I haven’t yet. I’m sure it’s every bit of 40-50 pounds though.

Keeping the valves was necessary for me considering I’ve got a 15 month old little girl. When we’re in my car in lieu of my wife’s, it’s nice to be able to put it into its quietest mode. As for the sound, it didn’t necessarily change. The notes hit a little higher / lower depending on the mode...

Not a stupid question at all. Miller Muffler off of George Bush Tollway. 19350 Preston Rd Dallas, TX 75252 United States $500

How does the new cam sound compared to stock?

Appreciate it! Yeah, definitely looking for the full cover replacement. Not just the stick on style

Can you post a picture from the front pls? Also, link for the mirror caps would be awesome if you have it. Thanks!

Completely understand. It’s more work but I can always cut the y pipes out and weld back into the original box if desired