Recent content by BW56M

Who cares...........what matters is, does it sound good to you?

Not that one. Can't fix pinch welds.

Performance Cadillac in Carroll Ohio

My grandson just got a Genesis G70 Sport Prestige. It is an absolute blast to drive. Food for thought. 🤔

I was at a high volume Cadillac dealer a few weeks ago. They had no less than six new Lyrics on the lot. The salesman I spoke to said, in the year he has been there, they've only sold one. He said they can't give them away.

I'm sure you'll enjoy the drive home. Don't forget to vary your speed during the break in period.

Deleted

Mine (5BW) had a slight drone when it was brand new, but it's basically gone away at 1100 miles. Could have been the rear diff during break in. Dunno! That's why I'm having it changed in the fall before winter storage.

I'll take them both. Just put the 5BW in the truck of the 58 and ship it. :ROFLMAO:

Unacceptable! Looks like all they did was try to push it into place, rather than take it apart and properly reinstall.

If you have a foam cannon, I assume you have a pressure washer. A 2000 psi pressure washer rated at 1.2 gallons per minute, using a 40° nozzle with a 2.5 orifice, will equate to approximately 1100 psi at the tip. Most detailers prefer 1050 to 1200 psi, which is very safe. Again, there are...

Could be the product used, the person doing the coating, number of coats, etc. The shop that coated mine used Kamikaze Stance Rim Coat 4.0 on my wheels. IDK, could be my imagination, but they don't seem to get nearly as dusty and dirty as before the coating.

Have your wheels ceramic coated. It helps quick at bit. They'll still get dirty, albeit not nearly as bad, but it is much easier to clean them.

As long as you are using 2000 psi or less, using a 40 degree nozzle and stay at least a foot away from the surface, you should be fine. YouTube has a lot of videos on pressure washing and appropriate equipment.

That was my exact thought. Hope they get it squared away for you.